Remove document <span id="remove-document-name"></span> from <span id="remove-cart-name"></span>?
Global economic expansion has greatly increased the demand for iron, steel, aluminum, and copper. Scrap handling facilities, steel plants, rolling mills, aluminum smelters, and electrowinning operations require rugged material handling machines that place high demands on energy and data transmission systems. Reliability is of paramount importance, as any unscheduled downtime will cause waste and lost productivity. Electric systems must withstand high heat, sparks, metal splatter and conductive dust. Aluminum pot line cranes need conductor systems that can handle high currents during the stationary operating cycle. In steel mills, mission-critical charging and ladle handling cranes must operate where furnaces and molten steel ambient heat often exceeds 70°C. To survive, cables need special heat shielding and conductor rails often require high-heat insulation. Bar, billet and coil handling cranes operate at high speeds and must position and turn loads accurately. Lastly, the environment around electrowinning and plating lines will corrode ordinary electrification components.
Conductix-Wampfler products are used in metals facilities all over the world. We understand metallurgical processes from raw material supply, to metal making, to final finishing. With our global sales and service network, we are always close to your business for local service and support. If you need on-site installation assistance or a complete turnkey-job, there is no more experienced partner than Conductix-Wampfler.
Our products for metal plants include:
Conductor Rails – provide runway power for Charging Cranes, Ladle, and Tundish Cranes, slab/billet cranes, and coil/bar/plate handling cranes. Insulated bars are used up to 1500 amp; Welded Cap Rail for 2500 to 6000 amps. They power cranes in corrosive sintering, plating, and electrowinning operations, with optional Dura-Coat protection and supply continuous current draw for aluminum pot line cranes that operate while stationary.
Mobile Manipulator in a smithy
ZVU Kovárna, a.s. [CZ]
Main power supply for the Manipulator
RXP-8 4G25 mm2
3-phase motor with magnetic clutch
Environmental condition [s]
- 20 °C up to + 40 °C
Additional information [s]
Sophisticated speed and torque control are ideal for machines with highly dynamic operation.
Highly efficient components and low starting inertia.
Smooth handling of cable increases cable lifetime and overall system reliability.
Optimal corrosion protection even under aggressive conditions - flanges and reel drum are manufactured from hot dip galvanized steel or stainless steel.
- AC motor with magnetic coupler (MAG drive): up to 180 m/min
- Variable frequency controlled (SMART Drive): up to 300 m/min
Winding length: 700 m max
OD of spool:
- Monospiral spool: 1,100 mm - 8,000 mm
- Single layer drum for spreader reels: 1,200 mm
- BNA / A3X: 1,100 Nm - 11,000 Nm
- NCR: 2,500 Nm - 11,000 Nm
Slip ring assembly:
- Power low voltage max: 690 V - 1600 A
- Power high voltage max: 24,000 V - 500 A
- Control max: 500 V - 25 A
- Data: fiber optic, mA
Temperature range: -40 °C - +60 °C